Français  |
| Les caractéristiques | The material is stainless steel, have done vacuum harden treatment and deeply cold treatment to HRC50~55 before doing the grinding process, the essence is not easy to deformed. |
| Application | The crossbeam is suitable for machining large-size parts of wire cutting machine tools, and the products can be customized according to the travel of the machine tools of customers. |
| Parallélisme | Within 0.003/100mm |
| Squareness | Within 0.005/100mm |
| Noter | Maximum weight of workpiece: 70kg (when two pieces are used together), any part such as screw may be damaged when the weight exceeds 70kg. |
| principe de fonctionnement: |
2.Calibrate the reference plane (a) of the main body of the crossbeam, and use a dial indicator to make it parallel tothe x/ Y axis of the machine. 3.Correction of horizontal direction: (1)use a dial indicator to mark and calibrate the reference surface (upper surface) of the object to be processed,adjust the bolt (upper) to rotate clockwise, and raise Part B. (2)adjust the bolt(lower) to rotate clockwise and lower part B.Use the upper and lower adjusting bolts alternatelyto make them horizontal. Note: after the beam calibration, please confirm that all the adjusting bolts should be tightened. |
| Les caractéristiques | The material is stainless steel, have done vacuum harden treatment and deeply cold treatment to HRC50~55 before doing the grinding process, the essence is not easy to deformed. |
| Application | The crossbeam is suitable for machining large-size parts of wire cutting machine tools, and the products can be customized according to the travel of the machine tools of customers. |
| Parallélisme | Within 0.003/100mm |
| Squareness | Within 0.005/100mm |
| Noter | Maximum weight of workpiece: 70kg (when two pieces are used together), any part such as screw may be damaged when the weight exceeds 70kg. |
| principe de fonctionnement: |
2.Calibrate the reference plane (a) of the main body of the crossbeam, and use a dial indicator to make it parallel tothe x/ Y axis of the machine. 3.Correction of horizontal direction: (1)use a dial indicator to mark and calibrate the reference surface (upper surface) of the object to be processed,adjust the bolt (upper) to rotate clockwise, and raise Part B. (2)adjust the bolt(lower) to rotate clockwise and lower part B.Use the upper and lower adjusting bolts alternatelyto make them horizontal. Note: after the beam calibration, please confirm that all the adjusting bolts should be tightened. |
Français
English 
Pусский 
Español 
Deutsch 
Italia 
日本語 
Tiếng Việt 
ไทย 
Bahasa indonesia 
magyar 